Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
openwrt:manual:zsun [2019/11/17 00:50]
theexpertnoob [0b. PreSetup A5-V11]
openwrt:manual:zsun [2019/11/17 06:52] (current)
theexpertnoob [0a. PreSetup ZSUN]
Line 15: Line 15:
 Now testing on LEDE for A5-V11 with latest piratebox. Will create a new wiki page for A5-V11 LEDE setup as well as update this wiki once all testing is complete.</​WRAP>​ Now testing on LEDE for A5-V11 with latest piratebox. Will create a new wiki page for A5-V11 LEDE setup as well as update this wiki once all testing is complete.</​WRAP>​
  
-==== 0a. PreSetup ZSUN ====+==== 0. PreSetup ZSUN ====
   * Having a Zsun running OpenWrt. I've used the [[https://​wiki.hackerspace.pl/​projects:​zsun-wifi-card-reader:​factory-update|hackerspace.pl]] method. ​   * Having a Zsun running OpenWrt. I've used the [[https://​wiki.hackerspace.pl/​projects:​zsun-wifi-card-reader:​factory-update|hackerspace.pl]] method. ​
   * microSD card (current data will be destroyed)   * microSD card (current data will be destroyed)
Line 65: Line 65:
 </​code>​ </​code>​
  
-==== 0b. PreSetup A5-V11 ==== 
-  * Having an A5-V11 running OpenWrt LEDE. I've used [[https://​openwrt.org/​toh/​unbranded/​a5-v11|this]] method. Scroll down to "​English (QualComm) Factory Firmware"​ 
-  * Once you have LEDE or OpenWRT installed, I suggest you sysupdate to [[http://​www.druss.org/​public/​LEDE_wifi_usb.bin|this build]]. 
-  * USB Flash Drive greater than 1GB formatted fat 32. (current data will be destroyed) 
-  * Root password is suggested but no longer required for LEDE. 
  
-  * Keep your A5-V11 hardwired and then connect via SSH to 192.168.1.1 as root. Make sure the router it is connected to is NOT also 192.168.1.1. 
-  * Bunch of uci commands. Copy and paste each into the command line of the shell prompt. 
-<​code>​ 
-uci set uhttpd.main.listen_http=9080 
-uci set uhttpd.main.listen_https=9443 
-uci commit 
-/​etc/​init.d/​firewall stop 
-/​etc/​init.d/​firewall disable 
-/​etc/​init.d/​dnsmasq stop 
-/​etc/​init.d/​dnsmasq disable 
-reboot 
- 
-</​code>​ 
-  * Reconnect 
-<​code>​ 
-ping google.com 
-</​code>​ 
-Work in Progress. 
 ==== 1. Setup Mounts ==== ==== 1. Setup Mounts ====
 === Format SD card === === Format SD card ===
Line 115: Line 92:
 uci commit uci commit
 mkdir /​mnt/​sda2 ​ mkdir /​mnt/​sda2 ​
-mount /dev/sda2 /mnt/sda2+mount -t ext4 /dev/sda2 /mnt/sda2
 tar -C /overlay -cvf - . | tar -C /mnt/sda2 -xf - tar -C /overlay -cvf - . | tar -C /mnt/sda2 -xf -
 uci add fstab mount uci add fstab mount