Differences

This shows you the differences between two versions of the page.

--- raspberry_pi:mods:mesh [2017/05/25 21:27]
matthias [Mesh config script]
+++ raspberry_pi:mods:mesh [2018/02/23 16:54] (current)
matthias [Mesh config script] without cd but use homedir
@@ Line 16: / Line 16: @@
    - Create Mesh setup script & make it bootable
    - Configure Avahi to announce PirateBox
+===== Prereq. =====
+Check the internet is working and sudo is active:
+  sudo touch /tmp/sudo_test
+  sudo rm /etc/resolv.conf
+  sudo sh -c 'echo "nameserver 8.8.8.8" > /etc/resolv.conf'
+  dig google.de | grep -q -e 192.168.77.1 && echo "error, Internet is not working!"
 ===== Software bridge =====
 Create the network configuration file for the bridge:
   cat <<EOF > piratebox_bridge
   Description="General bridge interface for PirateBox"
@@ Line 88: / Line 97: @@
   sudo sh -c 'echo "br_netfilter" > /etc/modules-load.d/netfilter.conf'
   sudo modprobe br_netfilter
+  sudo pacman -Sy --noconfirm batctl
   wget https://github.com/PirateBox-Dev/PirateBox-Mesh/releases/download/1.1.4/piratebox-mesh_1.1.4_all_NON_WRT.sh
   chmod a+x piratebox-mesh_1.1.4_all_NON_WRT.sh
   sudo mv piratebox-mesh_1.1.4_all_NON_WRT.sh /bin/piratebox-mesh.sh
   sudo sed -i -e 's|phy0|phy1|g'  \
-     -e 's|MESH_CHANNEL=0|MESH_CHANNEL=6| \
+     -e 's|MESH_CHANNEL=0|MESH_CHANNEL=6|' \
      -e 's|EXCHANGE_MAC="yes"|EXCHANGE_MAC="no"|' \
      /bin/piratebox-mesh.sh
@@ Line 98: / Line 108: @@
 Create a start/stop script:
-  cat <<EOF > mesh.service
+  cat <<EOF > ~/mesh.service
   [Unit]
   Description=PirateBox Mesh Service
@@ Line 112: / Line 122: @@
   WantedBy=multi-user.target
   EOF
-  sudo mv mesh.service /etc/systemd/system
+  sudo mv ~/mesh.service /etc/systemd/system
   sudo systemctl daemon-reload
   sudo systemctl start mesh.service
@@ Line 124: / Line 134: @@
   sudo systemctl enable  avahi-daemon
+===== Finalize =====
+At the end you should do a reboot
+  sudo reboot