Differences

This shows you the differences between two versions of the page.

--- openwrt:zsun [2016/04/28 02:17]
theexpertnoob
+++ — (current)
@@ Line 1: / Line 1: @@
-===== Piratebox on the Zsun =====
-Like many of us have read the [[https://hardware.slashdot.org/story/16/01/26/1430201/openwrt-turns-a-14-card-reader-into-the-smallest-wireless-ap|article]] on slashdot about the Openwrt capabilities of the Zsun Wifi card Reader.
-The idea of having PirateBox running on the smallest device yet made me order one from China.
-After many hours of installing, troubleshooting, resetting e.d. I now have a complete working Piratebox installation.
-I would like to share my installation scripts in order to let you install your own.
-<WRAP center round important 100%>
-OpenWrt (15.05 “Chaos Calmer”) and PirateBox (1.0.7) were used in the making of this tutorial.
-</WRAP>
-**DISCLAIMER:** NOBODY will take responsibility or be liable for anything you do to your zsun. If you brick it trying these procedures, **YOU** are solely responsible for your actions. **YOU HAVE BEEN WARNED**.
-==== 0. uci_PreSetup.sh ====
-  * Having a Zsun running OpenWrt. I've used the [[https://wiki.hackerspace.pl/projects:zsun-wifi-card-reader|hackerspace.pl]] method.
-  * 1 microSD card with 1 ext4 partition.
-  * [[http://bit.ly/zsunprtbx|Download]] and extract meduza's custom zsun install package to microSD. FIXME
-  * Root password [[https://wiki.openwrt.org/doc/howto/firstlogin|set]].
-  * Changed the default uhhtpd (LuCI) ports to **9080** and **9443**.
-<code>
-#uhttpd config
-uci set uhttpd.main.listen_http=9080
-uci set uhttpd.main.listen_https=9443
-uci commit
-</code>
-  * Get internet working on the zsun.
-<code>
-#wireless config
-uci set wireless.radio0.channel=auto
-uci set wireless.radio0.txpower=18
-uci set wireless.radio0.country=00
-uci set wireless.radio0.disabled=0
-uci add wireless wifi-iface
-uci set wireless.@wifi-iface[-1].device=radio0
-uci set wireless.@wifi-iface[-1].ssid='your Wifi name'
-uci set wireless.@wifi-iface[-1].mode=sta
-uci set wireless.@wifi-iface[-1].network=wwan
-uci set wireless.@wifi-iface[-1].encryption=psk2
-uci set wireless.@wifi-iface[-1].key='yourSuperSecurePass'
-uci set wireless.@wifi-iface[-1].disabled=0
-uci commit
-#netwerk interface config
-uci set network.wwan=interface
-uci set network.wwan.proto=dhcp
-uci commit
-#firewall config
-uci set firewall.@zone[1].network='wan wan6 wwan'
-uci commit
-#reload new config
-/etc/init.d/network reload && /etc/init.d/firewall reload && wifi
-</code>
-  * Reconnect to OpenWRT
-<WRAP center round important 100%>
-An additional wireless connection with your own WiFi is made in 'sta' mode. Because OpenWrt (and PirateBox) are using the IP 192.168.1.1 (sub-netmask /24) the network (WiFi) you are connecting to can't use the same sub-net mask.
-</WRAP>
-  * Verify your internet connection using
-<code>
-ping google.com
-opkg update
-</code>
-==== 1. PreSetup (script) ====
-<code>
-mkdir /mnt/ext
-mkdir /mnt/usb
-mkdir /mnt/sda1
-mount /dev/sda1 /mnt/sda1
-tar -C /overlay -cvf - . | tar -C /mnt/sda1 -xf -
-uci add fstab mount
-uci set fstab.@mount[-1].target=/overlay
-uci set fstab.@mount[-1].device=/dev/sda1
-uci set fstab.@mount[-1].fstype=ext4
-uci set fstab.@mount[-1].options=rw,sync
-uci set fstab.@mount[-1].enabled=1
-uci set fstab.@mount[-1].enabled_fsck=0
-uci commit
-reboot
-</code>
-  * Reconnect to OpenWRT
-==== 2. ApplySetup (script) ====
-  * remount the vfat partition
-<code>
-echo "src/gz piratebox http://stable.openwrt.piratebox.de/all/packages" >> /etc/opkg.conf
-sed 's|option check_signature 1||g' -i /etc/opkg.conf
-opkg update
-opkg install extendRoot
-sed -i 's|ext_linktarget="/usr/local"|ext_linktarget=""|g'  /etc/ext.config
-</code>
-==== 3. PirateboxInstall (script) ====
-<code>
-#run manual
-# some symlync
-mkdir /usr/local/
-ln -s /etc /usr/local/
-ln -s /usr /usr/local/
-# solve port 80 issue
-opkg install lighttpd
-/etc/init.d/lighttpd stop
-/etc/init.d/lighttpd disable
-# Letsgo
-opkg install piratebox
-</code>
-  * Connection will be closed, reconnect to ssid piratebox with fixed ip
-    *IP: 192.168.1.2
-    *GW: 192.168.1.1
-# finish install with
-<code>
-/etc/init.d/piratebox init
-/etc/init.d/piratebox start
-/opt/piratebox/bin/timesave.sh  /opt/piratebox/conf/piratebox.conf install
-/etc/init.d/piratebox timesave
-chmod a+w /opt/piratebox/share/tmp
-/etc/init.d/piratebox enable
-# and enable LuCI
-/etc/init.d/uhttpd start
-/etc/init.d/uhttpd enable
-</code>
-=== Install Minidlna ===
-<code>
-opkg update
-opkg -d ext install minidlna
-cp /opt/piratebox/src/openwrt.example.minidlna /mnt/ext/etc/config/minidlna
-/etc/init.d/minidlna start
-/etc/init.d/minidlna enable
-</code>
-=== Install Imageboard ===
-<code>opkg -d ext install piratebox-mod-imageboard</code>
-  * if you get and error about failing to get dependencies * libc * libc *, try this:
-<code>
-cd /tmp
-wget http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/base/libc_0.9.33.2-1_ar71xx.ipk
-opkg -d ext install libc_0.9.33.2-1_ar71xx.ipk
-</code>
-  * Then try installing the imageboard again.
-=== post install config imageboard ===
-  * This is a password **YOU** set for the imageboard.
-<code>/opt/piratebox/bin/board-autoconf.sh</code>
-  * Verify the password set correctly
-<code>vi /opt/piratebox/www/board/config.pl</code>
-(CTRL+Z) to exit vi
-=== Turn off Internet connection ===
-<code>vi /etc/config/wireless</code>
-<file>
-config wifi-iface
-	option network 'wwan'
-....
-	option disabled '1'
-</file>
-==== All done! ====
-<code>reboot</code>
-  * Return your Client PC back to its original IP settings.
-==== Credits ====
-  * Matthias - for the Piratebox Project.
-  * meduza - for the majority of the scripting for the Zsun.
-  * stylesuxx - for the wifi configuration and troubleshooting.
-  * TheExpertNoob - for troubleshooting and this wiki guide.
-If I forgot anyone else, PM me.