This is an old revision of the document!
Reflash using an USB Stick
The following howto works, if you already have usb drivers (pre) installed. This can be manually or within a custom image
- Download Image (link)
to your computer
- Power off the MR3020
- Take your USB device and put the downloaded file to your usb device
- Connect the MR3020 to your computer via Ethernet.
- Set up your of the computer to 192.168.1.2
- Start to ping 192.168.1.1 (this is the failsave IP) infinitive
- Power the MR3020 on and when the WPS Button starts to blink , push it (it will blink faster)
- You see the ping getting response
- Run
telnet 192.168.1.1
- Plugin your USB Device to the pbx-router
- Do the following commands:
/etc/init.d/boot start (This will return some error messages - ignore it)
- Try
mount /dev/sda1 /mnt cd /mnt/ mtd -r write <your filename> firmware * The device reboots automatically after successfully flashing
If mount does not work, you can do
mount_root
Wich mounts your root partition and you can edit files. after you are finished run
reboot -f