Differences

This shows you the differences between two versions of the page.

--- openwrt:troubleshooting [2017/12/16 07:39]
comap89 [How can I restore the original firmware?]
+++ openwrt:troubleshooting [2017/12/16 11:22] (current)
comap89 Add: My USB stick died, how to restore my PirateBox ?
@@ Line 113: / Line 113: @@
 ==== When using SSH, it seems that my Box does not accept the password ====
-When using SSH on a Mac or Linux system, do not forget **root@**192.168.1.1 . The ''root@'' is required, because ssh will try to login via the user "root". If you miss that part out, the ssh command will use the user you are currently logged in.
+When using SSH on a Mac or Linux system, do not forget **root@**192.168.1.1 . The ''root@'' is required, because ssh will try to login via the user "root". If you miss that part out, the ssh command will use the user you are currently logged in. \\
 If it still does not work, try to use ''telnet 192.168.1.1''. If that work and you already used ''passwd'' to setup a password, something went wrong while flashing. Try to reflash the device with the openwrt*.bin file, or open up a forum post for clarification.
@@ Line 123: / Line 123: @@
   * For **PirateBox 1.1** devices, you can use the [[openwrt:reflash_with_autoflash|Reflash PirateBox with auto_flash function]]-HowTo.
   * For //older// PirateBox: copy your firmware image file and a copy your unzipped install folder, then follow this [[openwrt:reflash_with_usb|Reflash using an USB Stick]]-HowTo. **Please plugin the USB only after you successfully logged in via failsafe mode**.
+==== My USB stick died, how to restore my PirateBox ? ====
+Use the instructions above.
 \\