Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
openwrt:manual:zsun [2019/11/17 05:08]
theexpertnoob [0b. PreSetup A5-V11]
openwrt:manual:zsun [2019/11/17 05:15]
theexpertnoob [0b. PreSetup A5-V11]
Line 71: Line 71:
   * Root password is suggested but no longer required for LEDE.   * Root password is suggested but no longer required for LEDE.
   * Keep your A5-V11 hardwired and then connect via SSH to 192.168.1.1 as root. Make sure the router it is connected to is NOT also 192.168.1.1.   * Keep your A5-V11 hardwired and then connect via SSH to 192.168.1.1 as root. Make sure the router it is connected to is NOT also 192.168.1.1.
-  * Bunch of uci commands. Disabling firewall and DNSmasq for setup. ​Copy and paste each into the command line of the shell prompt.+  * Copy and paste each into the command line of the shell prompt.
 <​code>​ <​code>​
-uci set uhttpd.main.listen_http=9080 +vi /etc/config/network
-uci set uhttpd.main.listen_https=9443 +
-uci commit +
-/etc/init.d/firewall stop +
-/​etc/​init.d/​firewall disable +
-/​etc/​init.d/​dnsmasq stop +
-/​etc/​init.d/​dnsmasq disable +
-reboot +
 </​code>​ </​code>​
-  * Reconnect+press I to edit. 
 +Under config interface '​lan'​ 
 +change '​static'​ to '​dhcp'​ 
 +then press SHIFT+Z, SHIFT+Z to exit. 
 +<​code>​ 
 +service network reload 
 +</​code>​ 
 +In my case, this is required by my router to access the internet. It wont allow Static IPs to connect to the internet as I manage "​static IPs" as reserved IPs on the router.
 <​code>​ <​code>​
 ping google.com ping google.com