Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
openwrt:internet_enabling [2013/11/12 20:56]
matthias created basic mockup for Network configuration
openwrt:internet_enabling [2014/11/30 14:53]
matthias [Additional steps on already installed PirateBox]
Line 1: Line 1:
 ====== Enable your box for getting internet access ====== ====== Enable your box for getting internet access ======
 ===== Devices with one ethernet-port ===== ===== Devices with one ethernet-port =====
-FIXME+The following lines can be used to exchange the behaviour of the LAN port to a WAN port 
 + 
 +  cp /​etc/​config/​network /​etc/​config/​network.backup 
 +  uci set network.wan=interface  
 +  uci set network.wan.ifname=$( uci get network.lan.ifname ) 
 +  uci set network.wan.macaddr=$( uci get network.lan.macaddr )  ## this line is needed at VoCore 
 +  uci set network.wan.proto=dhcp 
 +  uci del network.lan.ifname 
 +  uci commit 
 ==== Additional steps on already installed PirateBox ==== ==== Additional steps on already installed PirateBox ====
-FIXME+Everytime you want to have internet access, you need to switch the dns resolution off. If you don't do this step, the box will resolve always its own IP address.
  
    /​etc/​init.d/​piratebox nodns    /​etc/​init.d/​piratebox nodns
  
 +You may add this line above the ''​exit''​ command in ''/​etc/​rc.local''​.
 ===== Devices with a separate WAN Port ===== ===== Devices with a separate WAN Port =====
 FIXME FIXME