Differences

This shows you the differences between two versions of the page.

--- openwrt:diy [2017/12/11 06:10]
comap89 [Auto-Installation] Misc.
+++ openwrt:diy [2018/02/10 19:21]
comap89 [Post-Installation]
@@ Line 23: / Line 23: @@
 <html><span style="font-size:125%;"><b>1.</b></span></html> **Wireless router (one of the following):**
-  ***TP-Link MR3020** ** [[amazon>B006DEBXD0|(Amazon)]] ** **[[http://www.newegg.com/Product/Product.aspx?Item=N82E16833704127&cm_re=mr3020-_-33-704-127-_-Product|(Newegg)]]** **[[https://www.ebay.com/sch/i.html?_odkw=mr+3020+OR+3040&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xmr+3020&_nkw=mr+3020&_sacat=0|(eBay)]]**
+<del> ***TP-Link MR3020** ** [[amazon>B006DEBXD0|(Amazon)]] ** **[[http://www.newegg.com/Product/Product.aspx?Item=N82E16833704127&cm_re=mr3020-_-33-704-127-_-Product|(Newegg)]]** **[[https://www.ebay.com/sch/i.html?_odkw=mr+3020+OR+3040&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xmr+3020&_nkw=mr+3020&_sacat=0|(eBay)]]** </del> Newer MR3020 Models aren't possible to be flashed with PirateBox anymore.
   ***TP-Link MR3040** **[[amazon>B0088PPFP4|(Amazon)]]** **[[https://www.newegg.com/Product/Product.aspx?Item=N82E16833704138&cm_re=TP-LINK_MR3040-_-33-704-138-_-Product|(Newegg)]]** **[[https://www.ebay.com/sch/i.html?_odkw=WR703N&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR11.TRC1.A0.H0.Xmr3040&_nkw=mr3040&_sacat=0|(eBay)]]** (Be careful:!: only v1 & v2 models are supported)
@@ Line 92: / Line 92: @@
 ----
 ===== Upgrade PirateBox =====
-If you're currently running an 1.1.* version of PirateBox on your router, these instructions should get you up and running in a flash (literally!). **Please Note:** The instructions below are specifically for the TP-Link MR3020, TP-Link MR3040, and the GLiNet routers. Try to [[openwrt:version|version]].
+**Please Note:** The instructions below are specifically for the TP-Link MR3020, TP-Link MR3040, and the GLiNet routers.
-**Note:** If you're currently running a PirateBox on your router with **version 1.0**, you should follow the [[openwrt:upgrade_from_1.0.0|Update from PirateBox 1.0 -HowTo]].
+The upgrade process is different according the PirateBox version running on your router ([[openwrt:version|to know it]]):
+  * if **version 0.6 and below** is installed: you should follow the [[openwrt:upgrade_pre_1.0.0|Update a very old PirateBox-HowTo]].
-**Note:** If you're currently running a PirateBox on your router with **version 0.6 and below**, you should follow the [[openwrt:upgrade_pre_1.0.0|Update a very old PirateBox-HowTo]].
+  * if **version 1.0.* ** is installed: you should follow the [[openwrt:upgrade_from_1.0.0|Update from PirateBox 1.0 -HowTo]].
+  * if **version 1.1.* ** is installed: the following instructions should get you up and running in a flash (literally!).
 <html><span style="font-size:125%;"><b>1. Download Software</b></span></html>
@@ Line 147: / Line 148: @@
   box_init_setup.sh
-**c)** Create a password for the administrative root access. Choose "Option 1", then enter your password twice. **Notice:** It is not shown while entering it.
+**c)** Create a password for the administrative root access. Choose "Option 1", then enter your password twice. **Notice:** It is not shown while entering it. Write your password somewhere because you will not need it before several months (ie: PirateBox upgrade).
 **Note:** Once you have created a password for your PirateBox, telnet will be disabled. This means that in the future you will need to use the following command to access your PirateBox from the terminal:
@@ Line 160: / Line 161: @@
    /opt/piratebox/bin/board-autoconf.sh
-**b)** Enter your password, after you are promted, then you are done.
+**b)** Enter your password, after you are prompted, then you are done.
 <html><span style="font-size:125%;"><b>3. UPnP Media Server</b></span></html>