====== Install PirateBox without a custom image ======
If you have a device, that has no shipped auto-installation, you can still install PirateBox with manual instructions. 
  * [[openwrt:manual:zsun|Manual Instructions for Zsun]] (Chaos Calmer and PirateBox 1.1 beta)
===== Requirements =====

  * You need a device with an USB or SDCard slot.
  * Your device needs to be compatible to AttitudeAdjustment release from OpenWrt. The current trunk and BarrierBreaker release is **not supported**, because we can't guarantee it as working.
  * Flash your device with OpenWrt refering to [[http://wiki.openwrt.org|OpenWrt wiki]].
  * Make Internet-access available on your device.

===== Steps to be done =====

  * Login to your Box via SSH (use standard root/<your password>) or telnet (if root password not set).  The IP depends on the way you made Internet available, i.e. 192.168.1.1
  * Run the following command:

    echo "src/gz piratebox http://stable.openwrt.piratebox.de/all/packages" >> /etc/opkg.conf

  * On ChaosCalmer, you need to disable signature checking for the repository, because we don't have signed repositories yet. Edith /etc/opkg.conf and remove the line ''option check_signature 1'' or run.

    sed 's|option check_signature 1||g' -i /etc/opkg.conf
    

  * Update packages:

    opkg update

  * Install the extendRoot package:

    opkg install extendRoot

  * **Optional:** If you have a different installation destination, like a SDCard, edit  '''/etc/ext.config''' , and change the USB device option.
  * **Optional:** If you are challenging your luck with using BreakingBarrier or ChaosCalmer OpenWrt version, you might need to do a reboot after this step.
  * Initialize extendRoot:

    /etc/init.d/ext init

  * Refresh ash profile:

    source /etc/profile

  * Install the PirateBox package:

    opkg -d ext install extendRoot-piratebox

  * **Optional:** Install UPNP Server and imageboard

    opkg -d ext install extendRoot-minidlna
    opkg -d ext install piratebox-mod-imageboard

  * As a final step, you can reboot the device:

  reboot
  
===== Post Installation =====
After you finished the setup, you can run [[diy#post-installation|the normal post-installation steps]].